Split Phase Inverter with Two Phase Output AC110V/220V AC120V/240V 30kw 50kw Pure Sine Wave off Grid Power Inverter DC to AC Power Inverters
- الصفحة الرئيسية
- Split Phase Inverter with Two Phase Output AC110V/220V AC120V/240V 30kw 50kw Pure Sine Wave off Grid Power Inverter DC to AC Power Inverters
Split Phase Inverter with Two Phase Output AC110V/220V AC120V/240V 30kw 50kw Pure Sine Wave off Grid Power Inverter DC to AC Power Inverters
- ديمنج
- الفئة
- التاريخ
نظرة عامة على المشاريع
وصف المنتج
Power Frequency Pure Sine Wave Inverter Features:
1.Complete isolation-type inverter technology, noiseless output.
2.Adoption of advanced SPWM technology, pure sine wave output.
3.Dynamic current loop control technology to ensure inverter reliable operation.
4.Wide DC input voltage range.
5.Excellent EMC design.
6.Low output harmonic distortion (THD≤3%).
7.LED indicators for input voltage range, load power range, normal output & failure state.
8.Optional energy saving mode.
9.Extensive protections: reverse polarity, short-circuit, overload, under/over input voltage, over-temperature, and inverter’s inner fault identification protections.
Application
1. For desolate area like mountain, island, pasturing area, etc.
2. For transportation system like beacon light, traffic light, street light, etc.
3. For communication system: unattached operation microwave middle station, optical
cable maintenance station, etc.
4. For photovoltaic power station, wind-solar power station, park charging station, family
power house, factory power station, etc.
5. For solar building: has good business future.
6. For the new technology application project.
off grid solar power system
off grid wind turbine power system
50KW off grid two phase inverter technical parameters
| الطراز | NB220-50KTZ |
| Rated Capacity | Output two phase 50KW |
| Circuit Mode | IGBT/PWM |
| DC Input | |
| Input Rated Current | DC220V |
| Input DC voltage Range | DC180-270V |
| Input Rated Current | 252.5A |
| AC Output | |
| Output Mode | Two phase three wires |
| Output Wave | موجة جيبية نقية |
| Output Voltage | L1-N: 120Vac, L2-N: 120Vac, L1-L2: 240Vac |
| Output Voltage accuracy | ±1% |
| Output frequency | 50Hz/60HZ |
| Output frequency accuracy | ±0.01% |
| Output rated power | 50 كيلو وات |
| Output Rated current | 227.2A |
| معامل القدرة | 1 |
| Overload capacity | 120% 10 minutes |
| Overcurrent capacity | 200% 10 seconds |
| Dynamic voltage transient range | 2%(0~100% load change) |
| VTHD(Distortion) | THD<3%( non-linear load) |
| Display Mode | |
| Display Window | Touch screen display |
| Four digit voltmeter | Accuracy 0.1V |
| Four digit ampere meter | Accuracy 0.1A |
| Four digit frequency meter | Accuracy 0.1Hz |
| Four digit power/power factor meter | Accuracy 0.1W |
| System | |
| System efficiency | Normal mode: 94% |
| insulation resistance | DC> 500V 20MΩ |
| insulating strength | (Input and output to ground)1800Vdc, leakage current<3.5mA, No-arcing for 1 min |
| Protection Class | IP22 |
| Wiring method | Input and output wiring terminals,line bank |
| Thermal methods | Transformer forced fan cooling |
| درجة حرارة العمل | -10ºC~+50ºC |
| الرطوبة النسبية | 0-90%(No condensation) |
| Noise(dB) | <65dB |
| Protection Function | Input reverse protection, input under-voltage protection, output overload protection, output short circuit protection, thermal protection |
| Equipped with AC Bypass | نعم |
| Communication interface | RS485/WIFI/GPRS/Ethernet (optional) |
| Product Size(L*W*H)mm | 760×760×1520 |
| Product Weight(kg) | 450kg |
20KW off grid two phase inverter technical parameters
| الطراز | NB220-20KSZ | NB110-20KSZ | NB96-20KSZ | NB48-20KSZ |
| Rated Capacity | Output two phase 20KW | |||
| Circuit Mode | IGBT/PWM | |||
| DC Input | ||||
| Input Rated Current | DC220V | DC110V | DC96V | DC48V |
| Input DC voltage Range | DC180-300V | DC80-145V | DC75V-135V | DCC40V-60V |
| Input Rated Current | 92.6A | 185A | 208.3A | 416.7A |
| AC Output | ||||
| Output Mode | Two phase three wires | |||
| Output Wave | موجة جيبية نقية | |||
| Output Voltage | L1-N: 110Vac, L2-N: 110Vac, L1-L2: 220Vac | |||
| Output Voltage accuracy | ±1% | |||
| Output frequency | 50Hz | |||
| Output frequency accuracy | ±0.01% | |||
| Rated capacity | 25KVA | |||
| Output rated power | 20 كيلو وات | |||
| Output Rated ampere | 90.9A | |||
| Maximum output over current | 136.4A | |||
| Maximum nominal current of loads | 90.9A | |||
| معامل القدرة | 0.8 | |||
| Overload capacity | 120% 109A ,3 minutes,150% 136.4A,10 seconds | |||
| Dynamic voltage transient range | 2%(0~100% load change) | |||
| VTHD(Distortion) | THD<3%( non-linear load) | |||
| Display Mode | ||||
| Display Window | High accuracy four-in-one LED display | |||
| Four digit voltmeter | Accuracy 0.1V | |||
| Four digit ampere meter | Accuracy 0.1A | |||
| Four digit frequency meter | Accuracy 0.1Hz | |||
| Four digit power/power factor meter | Accuracy 0.1W | |||
| System | ||||
| System efficiency | Normal mode: 94% | |||
| insulation resistance | DC> 500V 20MΩ | |||
| insulating strength | (Input and output to ground)1800Vdc, leakage current<3.5mA, No-arcing for 1 min |
|||
| Protection Class | IP22 | |||
|
th style=”border:1px solid #ccc;padding:10px;background:#f5f5f5;text-align:left;font-size:13px;font-weight:bold;” >[‘Nature of Source Flow:’, ‘Passive inverter’]</ث th style=”border:1px solid #ccc;padding:10px;background:#f5f5f5;text-align:left;font-size:13px;font-weight:bold;” >[‘Certification:’, ‘ISO9001, RoHS, CE’]</ث td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Rated Capacity’, ‘Output two phase 50KW’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Circuit Mode’, ‘IGBT/PWM’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Input Rated Current’, ‘DC220V’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Input DC voltage Range’, ‘DC180-270V’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Input Rated Current’, ‘252.5A’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Output Mode’, ‘Two phase three wires’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Output Wave’, ‘Pure Sine Wave’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Output Voltage’, ‘L1-N: 120Vac,xa0 L2-N: 120Vac,xa0 L1-L2: 240Vac’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Output Voltage accuracy’, ‘±1%’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Output frequency’, ’50Hz/60HZ’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Output frequency accuracy’, ‘±0.01%’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Output rated power’, ’50KW’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Output Rated current’, ‘227.2A’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Power factor’, ‘1’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Overload capacity’, ‘120%xa0 10 minutes’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Overcurrent capacity’, ‘200%xa0 10 seconds’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Dynamic voltage transient range’, ‘2%(0~100% load change)’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘VTHD(Distortion)’, ‘THD<3%( non-linear load)’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Display Window’, ‘Touch screen display’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Four digit voltmeter’, ‘Accuracy 0.1V’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Four digit ampere meter’, ‘Accuracy 0.1A’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Four digit frequency meter’, ‘Accuracy 0.1Hz’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Four digit power/power factor meter’, ‘Accuracy 0.1W’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘System efficiency’, ‘Normal mode: 94%’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘insulationxa0resistance’, ‘DC> 500V 20MΩ’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘insulating strength’, ‘(Input and output to ground)1800Vdc, leakage current<3.5mA,No-arcing for 1 min’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Protection Class’, ‘IP22’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Wiring method’, ‘Input and output wiring terminals,line bank’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Thermal methods’, ‘Transformer forced fan cooling’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Working temperature’, ‘-10ºC~+50ºC’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Relative humidity’, ‘0-90%(No condensation)’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Noise(dB)’, ‘<65dB’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Protection Function’, ‘Input reverse protection, input under-voltage protection, output overload protection, output short circuit protection, thermal protection’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Equipped with AC Bypass’, ‘Yes’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Communication interface’, ‘RS485/WIFI/GPRS/Ethernet (optional)’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Product Size(L*W*H)mm’, ‘760×760×1520’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Product Weight(kg)’, ‘450kg’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Rated Capacity’, ‘Output two phase 20KW’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Circuit Mode’, ‘IGBT/PWM’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Input Rated Current’, ‘DC220V’, ‘DC110V’, ‘DC96V’, ‘DC48V’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Input DC voltage Range’, ‘DC180-300V’, ‘DC80-145V’, ‘DC75V-135V’, ‘DCC40V-60V’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Input Rated Current’, ‘92.6A’, ‘185A’, ‘208.3A’, ‘416.7A’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Output Mode’, ‘Two phase three wires’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Output Wave’, ‘Pure Sine Wave’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Output Voltage’, ‘L1-N: 110Vac,xa0 L2-N: 110Vac,xa0 L1-L2: 220Vac’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Output Voltage accuracy’, ‘±1%’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Output frequency’, ’50Hz’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Output frequency accuracy’, ‘±0.01%’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Rated capacity’, ’25KVA’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Output rated power’, ’20KW’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Output Rated ampere’, ‘90.9A’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Maximum output over current’, ‘136.4A’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Maximum nominal current of loads’, ‘90.9A’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Power factor’, ‘0.8’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Overload capacity’, ‘120% 109A ,3 minutes,150% 136.4A,10 seconds’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Dynamic voltage transient range’, ‘2%(0~100% load change)’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘VTHD(Distortion)’, ‘THD<3%( non-linear load)’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Display Window’, ‘High accuracy four-in-one LED display’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Four digit voltmeter’, ‘Accuracy 0.1V’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Four digit ampere meter’, ‘Accuracy 0.1A’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Four digit frequency meter’, ‘Accuracy 0.1Hz’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Four digit power/power factor meter’, ‘Accuracy 0.1W’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘System efficiency’, ‘Normal mode: 94%’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘insulationxa0resistance’, ‘DC> 500V 20MΩ’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘insulating strength’, ‘(Input and output to ground)1800Vdc, leakage current<3.5mA,No-arcing for 1 min’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Protection Class’, ‘IP22’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Wiring method’, ‘Input and output wiring terminals,line bank’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Thermal methods’, ‘Transformer forced fan cooling’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Working temperature’, ‘-10ºC~+50ºC’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Relative humidity’, ‘0-90%(No condensation)’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Noise(dB)’, ‘<65dB’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Protection Function’, ‘Input reverse protection, input under-voltage protection, output overload protection, output short circuit protection, thermal protection’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Equipped with AC Bypass’, ‘Yes’] td style=”border:1px solid #ccc;padding:8px;font-size:12px;” >[‘Product Size/Weight(L*W*H)mm’, ‘550*480*950mm/135kg’] |
||||
الميزات الرئيسية
- الشركة المصنعة/المصنع والشركة التجارية: الشركة المصنعة/المصنع والشركة التجارية