150–200 kVA AC480V60Hz to AC 380V50Hz Frequency Converter Three Phase In/Out Inverter
- Strona główna
- 150–200 kVA AC480V60Hz to AC 380V50Hz Frequency Converter Three Phase In/Out Inverter
Przegląd projektów
Product Description:
The main function of this series of variable frequency power supply is to convert the municipal power to the required voltage and frequency through power conversion circuit. Its main characteristics are to provide pure and reliable sinusoidal power output, low harmonic distortion, high stability frequency and voltage stabilization rate. It can simulate the output characteristics of different voltages and frequencies in different parts of the world, covering the needs of the whole industry. It fully meets the needs of engineers in design and development, product line testing and product quality assurance, life, over-high/over-low voltage simulation testing, imported equipment and production line power supply applications. In addition, it can support 400 Hz aerospace
•Inverter core adopts Mitsubishi Inverter Module
•Drive protection using Mitsubishi motor core
•Dynamic reaction rate < 2ms
•Three-phase power supply can adapt to 100% unbalanced load
•Touch screen display, sensitive operation, accurate 0.5 level, good controllability
•It can withstand 2 times rated current (Optional) without voltage drop.
•Frequency stability is less than 1%, load stability is less than 1%, and output frequency is adjustable.
•The output voltage can be adjusted in a wide range. The low-grade voltage can be continuously adjusted from 0 to 150 V, and the high-grade voltage can be continuously adjusted from 0 to 300 V. Low current is twice as high as high current.(Opcjonalnie)
•Protection level above IP55.
•The output terminal is isolated by transformer, and the harmonic component is small.
•Protection is comprehensive and fast, millisecond response rate, faster and safer step.
Three phase in and three phase out 150K
Power type | Three phase in and three phase out | |
Pojemność | 150KVA | |
Circuit mode | IGBT/SPWM | |
AC Input | Phase number | Three-phase four-wire + ground wire |
Input voltage range(Vac) | 480V±15% | |
Input frequency range(Hz) | 30-70 | |
Wyjście AC | Phase number | Three-phase four-wire + ground wire |
Wave form | Pure sine wave | |
Output Voltage(V) | 380Vac | |
Output Voltage Accuracy(V) | ≤1% | |
Output frequency range(Hz) | 45-65 | |
Output Frequency Accuracy(Hz) | ≤0.01% | |
Output rated current(A) | 197A/180A/126A | |
THD | ≤3% | |
Dynamiczny czas reakcji | 2 ms | |
Power factor(PF) | 0.8 | |
Przeciążalność | 110%,10min;200%,10s | |
Peak Coefficient(CF) | 3:1 | |
Wydajność | ≥90%(Resistive load 80%) | |
Wyświetlacz | Typ | LED/Touch Screen |
Communication | RS485/RS232/WIFI/GPRS | |
Środowisko | Insulation strength | 1500VAC,1min |
Noise (1 m) | ≤55dB | |
Temperatura otoczenia | -10ºC~+50ºC | |
Wilgotność | 0-90% (bez kondensacji) | |
Altitude(m) | ≤2000m | |
Indicator light | Electricity, Inverter (Power Supply, Overvoltage, Undervoltage, Overcurrent, Overheat, LED Model Configuration) | |
Ochrona | Input connection, input under voltage, output over voltage , output over current , output overload , output short circuit , overheat | |
Cooling mode | Fan | |
Specyfikacje
| Customization: Available | Application: Three Phase Transducer | Output Type: Triple |
|---|---|---|
| Power type | Three phase in and three phase out | |
| Pojemność | 150KVA | |
| Circuit mode | IGBT/SPWM | |
| AC Input | Phase number Three-phase four-wire + ground wire | |
| Input voltage range(Vac) | 480V±15% | |
| Input frequency range(Hz) | 30-70 | |
| Wyjście AC | Phase number Three-phase four-wire + ground wire | |
| Wave form | Pure sine wave | |
| Output Voltage(V) | 380Vac | |
| Output Voltage Accuracy(V) | ≤1% | |
| Output frequency range(Hz) | 45-65 | |
| Output Frequency Accuracy(Hz) | ≤0.01% | |
| Output rated current(A) | 197A/180A/126A | |
| THD | ≤3% | |
| Dynamiczny czas reakcji | 2 ms | |
| Power factor(PF) | 0.8 | |
| Przeciążalność | 110%,10min;200%,10s | |
| Peak Coefficient(CF) | 3:1 | |
| Wydajność | ≥90%(Resistive load 80%) | |
| Wyświetlacz | Typ LED/Touch Screen | |
| Communication | RS485/RS232/WIFI/GPRS | |
| Środowisko | Insulation strength 1500VAC,1min | |
| Noise (1 m) | ≤55dB | |
| Temperatura otoczenia | -10ºC~+50ºC | |
| Wilgotność | 0-90% (bez kondensacji) | |
| Altitude(m) | ≤2000m | |
| Indicator light | Electricity, Inverter (Power Supply, Overvoltage, Undervoltage, Overcurrent, Overheat, LED Model Configuration) | |
| Ochrona | Input connection, input under voltage, output over voltage , output over current , output overload , output short circuit , overheat | |
| Cooling mode | Fan |