10–30 kW Hydro PMG Asynchronous Generator
- Strona główna
- 10–30 kW Hydro PMG Asynchronous Generator
Przegląd projektów
Off grid hydroelectric generator system:
Grid tied hydroelectric generator system:
Characteristics
1. Optimum aerodynamic shape design: high efficiency, low noise.
2. Centrifugal pitch controlled mechanism: 3m/s low wind speed startup; 3-12m/s wind speed, following wind rotor rotate speed to adjust blade angle at optimum TSR, run in high efficiency; over rated wind speed, wind rotor never goes to over speed and has stable control; 3-35m/s wind speed, wind turbine can run smoothly.
3. Direct drive permanent magnet generator, low startup resistance moment, constant running ability of over loading 1.5 times, maintenance free for more than 30000 hour.
4. Safety control: has aerodynamic brake, electric magnet brake, mechanical brake and manual stop mechanism.
5. Sealed slip ring, no cable twist;
6. Streamline design.
7. Long acting anticorrosive treats, no corrosion in 15years.
* Above parameter only for reference
Could be custom made according to user’s requirements.
Specyfikacje
| Customization: Available | Conditions of Use: Marine, Land Use | Usage: Common Units |
|---|
Where It Is Used
Designed for horizontal-axis wind turbines and micro hydro turbines in remote, off-grid and harsh weather sites. Neodymium rare-earth magnets give high output at low RPM, ideal for low-wind and low-water-flow areas.
Selection Notes
Match generator rated voltage and RPM to your inverter or charge controller input. Our engineers assist with system sizing — share your site wind/hydro resource data and expected load profile for a tailored configuration.